01

Locate the red flashing light on the front of your electricity meter which flashes when you use power.

02

Record the number on the meter which explains how many times your meter flashes for each kWh of energy your home uses. This number is usually located on the front of your electricity meter. You need this number later after installation.

03

Clean meter using the alcohol wipe. Allow the area to dry. Select the most appropriate mounting bracket so the sensor will be directly over the red light. In most cases, this will be the square bracket.

04

Remove the backing tape and place the mount over the flashing red light. Press for 30secs to allow the tape to stick.

05

Attach the sensor to the mounting bracket and turn the Electricity Advisor on by pressing the power button & hold > 1sec.